Contractor Dumps
Specs and Features
-
Long Sill: 6” or 7” Structural Channel
-
Cross Member: 3” or 4” Structural Channel
- Cross Member Spacing: 12" On - Center
- Floor Deck: 3/16" Smooth Seamless Plate
- Side Rail: Integrated 10 ga. Sheet, Sloped 45 Degrees
- Bulkhead: Integrated 11 ga. Sheet
- Sides: 10 ga Formed Sides with No Vertical Posts
- Side Height: 12", 18" & 24" Available
- Top Rail: 3" x 3/16" Structural Tubing
- Side Boards: 6" Board Brackets
- Tail Gate: Fully Boxed 3 Panel Tail Gate
- Tail Gate Top Rail: 3" x 3/16" Structural Tubing
- Tail Gate Lower Hardware: Full Width, One Piece 1" Pin
- Tail Gate Upper Hardware: 1/2" Plate Offset Upper Hinge Arm
- Cab Protector: Integrated 24" Cab Protector with Tarp Provision
- Rear Skirt: 7 ga. Sheet with Recessed Lighting Under Tail Gate
- Rear Skirt: Lights (4) S/T/T LED & (2) Reverse LED
-
Clearance Lights: 3/4" LED Federal 108 Spec
-
Wiring: Modular Plug & Play Harness Connects Directly to the OEM Truck Harness
-
Powder Coated: Black
-
Mud Flaps: Standard for Each Rear Wheel
- Back Up Alarm: Standard 97 Decibel Alarm
Popular Options
-
Sides: Folding Side Rails
- Sides: Vertical Side Bracing
- Tail Gate Upper Hardware: Drop Pin Upper Hardware for Drop Down Tail Gate
- Tail Gate: Metering Door in Tail Gate
- Lighting: S/T/T Lights in Rear Posts
- Cab Shield: Available from 12" to 36" in 6" Increments
- Tarp: Manual Tarp without Side Arms
- Tarp: Electric or Manual Tarp with Side Arms
-
Receiver Hitch: 16,000 lbs. Rated 2" Receiver Tube with Integrated ICC Bumper
-
Receiver Hitch: 21,000 lbs. Rated 2-1/2" Receiver Tube with Integrated ICC Bumper
- Pintle Hitch: 15 ton Pintle Hitch with 16,000 lbs. Rated 2" Receiver Tube and Integrated ICC Bumper
- Pintle Hitch: 15 ton Pintle Hitch with 21,000 lbs. Rated 2-1/2" Receiver Tube and Integrated ICC Bumper
-
Toolbox: Underbody Toolboxes
-
Powder Coated: Custom Color Options
Contractor Dump
Why Design matters
Customer reviews
I’m just a local guy that needed several parts laser cut out of a 4’x4’x1/4” plate for a home project. As K&K has grown to a much larger company in the last few years, I wasn’t sure they would be interested in such a small job, but Matt K&K Manufacturing did a great job in a very timely manner for a very reasonable price. I’m very thankful for the first class service K&K provided for me!!
Derek Landstrom
October 5th, 2023
Great place, Great people 👍
William Owensby
July 24th, 2023
Great communication, high quality work! Will be working with K&K again.
Windsor Wilkerson
December 13th, 2022
Very Professional, responsive, great job, thank you!
Tom Augenstein
December 6th, 2022
Matt and the people at K&K MFG. have been nothing short of spectacular. The customer service is top notch, communication is great, and the bed quality goes above and beyond expectation.
Spencer Arnold
December 1st, 2022
Excellent service and an excellent experience!
Zack
May 13th, 2022
I love it
Antonio Simon
July 27th, 2021
I bought two chipper trucks on the Internet from the Atlanta Kenworth dealership. They connected me with Dan who was nothing but professional and built the two nicest Truck Body’s I’ve ever owned in my 34 years of owning a tree care company. They were on time, on budget and the quality is second to none. I will never buy a truck body anywhere else.
Tad Jacobs
March 27th, 2021
Great! is what I say :)
DIANE SOLIS
November 20th, 2020
K and K always exceeds my expectations! They are my first choice for trailer fabrication!
Dallas Brown
August 13th, 2020
Our entire fleet is a rolling billboard for K and K Manufacturing and for good reason! Every truck and trailer they build is crafted exactly the way we want them and always delivered on time, if not ahead of schedule! We could not ask for a better service. Look no further!
Will Dellinger
August 13th, 2020
We use and will continue to use K and K for all our truck and trailer needs. They are a cut above when it comes to the quality of their work and service!
William Dellinger
August 13th, 2020
Always exceed expectations! No detail is too small for K and K, and that is why I will keep coming back!
Billy Dellinger
August 13th, 2020
Awesome people! Amazing work!! Will Definitely be back!!
Chuck Rutledge
August 13th, 2020
We love this family and their service!
Katelyn Dwyer
August 12th, 2020
Financing Opportunities
K & K Manufacturing has partnered with Crest Capital to make financing your purchases easy and streamlined, just like your experience with us.
Since 1989, Crest Capital has been providing the funds that help businesses grow. If there's one word that defines Crest Capital, it's consistency. Crest Capital started in Atlanta, Georgia in 1989 with the goal of providing hassle-free financing for small and medium sized businesses. Our focus has never changed: we offer easy financing that America's successful businesses – from Mom-and-Pops on up - need to grow.